H4 Rise & Fall Cubicle Hinge

H4 Rise & Fall Cubicle Hinge

The H4 hinge is available as standard to suit panel thicknesses  between 17 & 21mm. Other thicknesses can be accomodated on request.

The hinge is fitted to the edge of the door by a 6mm wood/metal dowel, this requires the edge of the door to be pre-drilled prior to fitting. The fascia component is attached via a bolt through "T" nut fixing and a single screw. The fascia will require a 10mm hole drilling to accept each "T" Nut.

The hinge incorporates a pair of adjustable nylon cams which can be set to allow the door to fall fully open, fully closed or two positions in-between.

A hidden screw is fitted to each hinge to prevent the doors from being lifted off, where immediate access is required these screws may be discarded so the door can be easily lifted off.

Supplied in a silver anodised finish or powder coated to a colour of your choice, the hinges are packed in pairs (i.e. one pair per standard size door 700 x 1800 x 17mm). Where heavy or outward opening doors are fitted, we would advise the fitting of three or more hinges to the door.

Order Codes

H04A         H4 Hinge (Pair) SAA

H04P         H4 Hinge (Pair) PPC

If you need expert help to solve a problem, call us now. Every member of our technical team has over ten year’s experience of the cubicle industry and are here to help you. Why wait, call now and see how we can help you.

From the UK 01325 313377

Outside the UK +44 1325 313377