Challenger Rise & Fall Cubicle Hinge


Challenger Rise & Fall Cubicle Hinge

Designed to compliment the Challenger Range of hardware, the Challenger Hinge offers additional support by wrapping around the edge of the door. This helps to prevent the door from "bursting" under heavy impact.

The hinge is available in two sizes to accomodate most standard panels.

12-13mm & 19-21mm thicknesses 

Full installation instructions are available.

Like the H3, the Challenger hinge is more suited to aggressive environments; the twin bolt through fascia fixing ensures doors cannot be kicked off the hinges.

The door is fixed to the hinge by a flush fitting through bolt which clamps the door tightly into a channel bracket. The fascia requires two holes per hinge to accomodate the nickel plated brass "T" nuts. All drilling can be done on site.

The hinge incorporates a pair of adjustable nylon cams which can be set to allow the door to fall fully open, fully closed or two positions in-between.

A hidden screw is fitted to each hinge to prevent the doors from being lifted off, where immediate access is required these screws may be discarded so the door can be easily lifted off.

Supplied in a silver anodised finish or powder coated to a colour of your choice, the hinges are packed in pairs (i.e. one pair per standard size door 700 x 1800 x 17mm). Where heavy or outward opening doors are fitted, we would advise the fitting of three or more hinges to the door.

Order Codes

HCHAL13A    Challenger Hinge 13mm (Pair) SAA

HCHAL13P    Challenger Hinge 13mm(Pair) PPC

HCHAL21A     Challenger Hinge 21mm (Pair) SAA

HCHAL21P     Challenger Hinge 21mm (Pair) PPC

Please feel free to speak with a member of our support team, every one of them has more than ten years experience in this industry and has dealt with every type of installation scenario during this time. We guarantee to find a solution to your needs, fast!

From the UK 01325 313377

Outside the UK +44 1325 313377